Tag Archives: compressor pump

China Professional Car Tire Truck 3.5HP Piston Portable Rotary Compresor De Tomillo Duty Heavy High Pressure Industrial Screw Max Air Pump Compressor with Best Sales

Product Description

 

Power:

2200w

Voltage:     

220V

Exhaust Pressure:    

0.8Mpa

Current:      

7.5A

Frequency:   

50HZ

Revolving Speed:

2850rpm

Volume of Gas Storage Tank:

35L

Cylinder:     

47mm

Scope of application:
Using for Pushing Pneumatic Nail Gun, Air Screw , Spray Painting Gun to work, also use to miniature instrument, blowing dust, Air inflation for small car and so on.
Product  Feature:

  1. High Power, high efficiency, low energy, high reliability.
  2. Piston Ring: New ECO circle, low friction coefficient, Auto lubricating system.
  3. Cylinder Liner: Surface hardening, deplete hardness, Accelerate the heat transfer, long using time.
  4. Suction and exhaust valve: Using advanced foreign technology.
  5. Multiple Pressure: Overload protection

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style: Lubricated
Cooling System: Air Cooling
Cylinder Arrangement: Balanced Opposed Arrangement
Cylinder Position: Angular
Structure Type: Semi-Closed Type
Compress Level: Multistage
Customization:
Available

|

air compressor

How does variable speed drive technology improve air compressor efficiency?

Variable Speed Drive (VSD) technology improves air compressor efficiency by allowing the compressor to adjust its motor speed to match the compressed air demand. This technology offers several benefits that contribute to energy savings and enhanced overall system efficiency. Here’s how VSD technology improves air compressor efficiency:

1. Matching Air Demand:

Air compressors equipped with VSD technology can vary the motor speed to precisely match the required compressed air output. Traditional fixed-speed compressors operate at a constant speed regardless of the actual demand, leading to energy wastage during periods of lower air demand. VSD compressors, on the other hand, ramp up or down the motor speed to deliver the necessary amount of compressed air, ensuring optimal energy utilization.

2. Reduced Unloaded Running Time:

Fixed-speed compressors often run unloaded during periods of low demand, where they continue to consume energy without producing compressed air. VSD technology eliminates or significantly reduces this unloaded running time by adjusting the motor speed to closely follow the air demand. As a result, VSD compressors minimize energy wastage during idle periods, leading to improved efficiency.

3. Soft Starting:

Traditional fixed-speed compressors experience high inrush currents during startup, which can strain the electrical system and cause voltage dips. VSD compressors utilize soft starting capabilities, gradually ramping up the motor speed instead of instantly reaching full speed. This soft starting feature reduces mechanical and electrical stress, ensuring a smooth and controlled startup, and minimizing energy spikes.

4. Energy Savings at Partial Load:

In many applications, compressed air demand varies throughout the day or during different production cycles. VSD compressors excel in such scenarios by operating at lower speeds during periods of lower demand. Since power consumption is proportional to motor speed, running the compressor at reduced speeds significantly reduces energy consumption compared to fixed-speed compressors that operate at a constant speed regardless of the demand.

5. Elimination of On/Off Cycling:

Fixed-speed compressors often use on/off cycling to adjust the compressed air output. This cycling can result in frequent starts and stops, which consume more energy and cause mechanical wear. VSD compressors eliminate the need for on/off cycling by continuously adjusting the motor speed to meet the demand. By operating at a consistent speed within the required range, VSD compressors minimize energy losses associated with frequent cycling.

6. Enhanced System Control:

VSD compressors offer advanced control capabilities, allowing for precise monitoring and adjustment of the compressed air system. These systems can integrate with sensors and control algorithms to maintain optimal system pressure, minimize pressure fluctuations, and prevent excessive energy consumption. The ability to fine-tune the compressor’s output based on real-time demand contributes to improved overall system efficiency.

By utilizing variable speed drive technology, air compressors can achieve significant energy savings, reduce operational costs, and enhance their environmental sustainability by minimizing energy wastage and optimizing efficiency.

air compressor

Can air compressors be used for medical and dental applications?

Yes, air compressors can be used for various medical and dental applications. Compressed air is a reliable and versatile utility in healthcare settings, providing power for numerous devices and procedures. Here are some common applications of air compressors in medical and dental fields:

1. Dental Tools:

Air compressors power a wide range of dental tools and equipment, such as dental handpieces, air syringes, air scalers, and air abrasion devices. These tools rely on compressed air to generate the necessary force and airflow for effective dental procedures.

2. Medical Devices:

Compressed air is used in various medical devices and equipment. For example, ventilators and anesthesia machines utilize compressed air to deliver oxygen and other gases to patients. Nebulizers, used for respiratory treatments, also rely on compressed air to convert liquid medications into a fine mist for inhalation.

3. Laboratory Applications:

Air compressors are used in medical and dental laboratories for various purposes. They power laboratory instruments, such as air-driven centrifuges and sample preparation equipment. Compressed air is also used for pneumatic controls and automation systems in lab equipment.

4. Surgical Tools:

In surgical settings, compressed air is employed to power specialized surgical tools. High-speed air-driven surgical drills, saws, and bone-cutting instruments are commonly used in orthopedic and maxillofacial procedures. Compressed air ensures precise control and efficiency during surgical interventions.

5. Sterilization and Autoclaves:

Compressed air is essential for operating sterilization equipment and autoclaves. Autoclaves use steam generated by compressed air to sterilize medical instruments, equipment, and supplies. The pressurized steam provides effective disinfection and ensures compliance with rigorous hygiene standards.

6. Dental Air Compressors:

Specialized dental air compressors are designed specifically for dental applications. These compressors have features such as moisture separators, filters, and noise reduction mechanisms to meet the specific requirements of dental practices.

7. Air Quality Standards:

In medical and dental applications, maintaining air quality is crucial. Compressed air used in healthcare settings must meet specific purity standards. This often requires the use of air treatment systems, such as filters, dryers, and condensate management, to ensure the removal of contaminants and moisture.

8. Compliance and Regulations:

Medical and dental facilities must comply with applicable regulations and guidelines regarding the use of compressed air. These regulations may include requirements for air quality, maintenance and testing procedures, and documentation of system performance.

It is important to note that medical and dental applications have specific requirements and standards. Therefore, it is essential to choose air compressors and associated equipment that meet the necessary specifications and comply with industry regulations.

air compressor

How is air pressure measured in air compressors?

Air pressure in air compressors is typically measured using one of two common units: pounds per square inch (PSI) or bar. Here’s a brief explanation of how air pressure is measured in air compressors:

1. Pounds per Square Inch (PSI): PSI is the most widely used unit of pressure measurement in air compressors, especially in North America. It represents the force exerted by one pound of force over an area of one square inch. Air pressure gauges on air compressors often display pressure readings in PSI, allowing users to monitor and adjust the pressure accordingly.

2. Bar: Bar is another unit of pressure commonly used in air compressors, particularly in Europe and many other parts of the world. It is a metric unit of pressure equal to 100,000 pascals (Pa). Air compressors may have pressure gauges that display readings in bar, providing an alternative measurement option for users in those regions.

To measure air pressure in an air compressor, a pressure gauge is typically installed on the compressor’s outlet or receiver tank. The gauge is designed to measure the force exerted by the compressed air and display the reading in the specified unit, such as PSI or bar.

It’s important to note that the air pressure indicated on the gauge represents the pressure at a specific point in the air compressor system, typically at the outlet or tank. The actual pressure experienced at the point of use may vary due to factors such as pressure drop in the air lines or restrictions caused by fittings and tools.

When using an air compressor, it is essential to set the pressure to the appropriate level required for the specific application. Different tools and equipment have different pressure requirements, and exceeding the recommended pressure can lead to damage or unsafe operation. Most air compressors allow users to adjust the pressure output using a pressure regulator or similar control mechanism.

Regular monitoring of the air pressure in an air compressor is crucial to ensure optimal performance, efficiency, and safe operation. By understanding the units of measurement and using pressure gauges appropriately, users can maintain the desired air pressure levels in their air compressor systems.

China Professional Car Tire Truck 3.5HP Piston Portable Rotary Compresor De Tomillo Duty Heavy High Pressure Industrial Screw Max Air Pump Compressor   with Best SalesChina Professional Car Tire Truck 3.5HP Piston Portable Rotary Compresor De Tomillo Duty Heavy High Pressure Industrial Screw Max Air Pump Compressor   with Best Sales
editor by CX 2024-02-18

China Standard Tire Inflator Heavy Duty Double Cylinders W/Portable Bag/Toolbox,Metal 12V Air Compressor Pump 150psi W/Multi Adapter for Car,Truck,SUV Tire,Dinghy,Air Bed etc. 12v air compressor

Product Description

Product Description

 CACCES Tire Inflator Heavy Duty Double Cylinders with Portable Bag/Toolbox, Metal 12V Air Compressor Pump 150PSI with Multi Adapters for Car, Truck, SUV Tires, Dinghy, Air Bed etc. Best Car Accessories Car and Home Tool

Factory Original Supply E508MAP

1, VARIETY OF product Configurations & Accessories for your FREE OPTIONS, 12A/15A, 12V 100PSI/150PSI Automatic inflation, Easy ONE-HAND Operation

2, CACCES Original Supply, BEST SELLER

3, FAST INFLATION METAL Valve NOZZLES for cars, motorcycles, bikes, balls, air mattress etc ALL FIT.

4, W/ or W/O super bright LED light, W/ digital or W/ mechanic display, W/ or W/O super bright LED light, Plastic/Metal shell, W/ carry bag or W/ toolbox and Tool KIT… 

About this item

FAST INFLATION: CHINAMFG Heavy Duty Double cylinder design, maximum pressure 100-150PSI, air flow 60-85L/min, inflates standard vehicle tire in 1-1.5 minutes (200/70/R18, 0-40psi)

STABILITY TECHNOLOGY: Rubber feet to make sure the 12V air pump stays where it is placed and does not move around during operation, make the air compressor more powerful, effectively reduce the vibration and noise.

DOUBLE CYLINDERS DIRECT DRIVE INFLATION PUMP: In the direct drive of the motor, the 2 cylinders at the same time compressed air, powerful and fast inflatable, direct drive motor makes the drive low rotating speed, high efficiency, compact, quiet, stability, and easy to control.

BRIGHT LED LIGHT(Optional): CHINAMFG portable 12V air compressor is equipped with bright and long-lasting LED lights, allow easy operation or making quick repairs in the dark and make sure you can be seen in an emergency to avoid any potential dangers.

EQUIPPED: The little double cylinder tire pump for car tires comes with a 59 inches extension air hose(optional), 3*nozzle adapters, spare fuse, heavy-duty cables and clamps, and a travel carry bag. It measures a compact 8.5″ (L) x 5.7″ (H) x 3″ (W) for bulk-free portability.

WORKS: particularly suitable for SUVs, trucks, vans, RVs, crossovers, MPVs, campers,Auto, trailers, minivans, also can use for cars, motorcycles, golf carts, bicycles, and more.

TRAVEL GIFT: During your car trip, carry our CHINAMFG little air compressor, which is easy to use and keep your tires in good condition. You can buy a little tire inflator as a gift to your friends or family.
 

 

Detailed Photos

 

Product Parameters

 

Product Name Tire Inflator Heavy Duty Double Cylinders with Portable Bag/Toolbox, Metal 12V Air Compressor Pump 150PSI with Multi Adapters for Car, Truck, SUV Tires, Dinghy, Air Bed etc. Best Car Accessories Car and Home Tool
Part No. E508MAP
Material: ABS + PP + Pure Copper
Product Dim.: 21.5(L)X8(W)X14.5(H) CM
Weight: 1.36KG-2.2KG (in toolbox and tools kit)
Output Power: 150W, 200W(Option)
Work Voltage: 12V
Working current 12A/15A(Option)
Maximum pressure: 100/150PSI(Option)
Length of Power Cord: 9.84inch(300CM)
Length of Air Horse: 29.53inch(75CM)
Air Flow: 60L/Min, 70L/Min (Option), 85L/Min (Option)
Sound Level: 50DB
Working Time: About 10 min.
Color: Knight Black, or any color for OEM
Packaging: PE Bag + Color Box + Carry Bag
Packing Qty/CTN: 6 PCS
Master Carton Dim.: 39.5*24.5*41 CM (23*12.5*19.5cm color box dim.)
Usage: Car, motorcycle, bike, ball, balloon, mattress, etc.
Accessories Incl. 3 Metal Valve Adaptors
(2 x Air Nozzle Cones, 1 x Needle Valve Adapter)

1* 11.8 inches Car Battery Clamp (FOC),
1* Carry Bag (FOC)
1* Replacement Fuse (FOC)
1* 59 inches Spiral Air Hose (Optional)
1* User Manual
1* Toolbox, Tools kit (Optional)

Main Features: 1, Digital, Optional Gauge & Portable PREMIUM Reliable QUALITY
2, Multi Use for Indoor & Outdoor carry use
3, Easy Large Touching Screen
4, Emergency bright LED LIGHT
5, Automatic inflation shut off
6, EASY OPERATION
OEM MOQ: 5,00 pcs, private color box MOQ 1,000 pcs

 

FAQ

1Q: When can I get the quotation?
1A: CONFIDENCE AUTOMOTIVE usually quotes you within 6 hours after we get your inquiry.

2Q: Can I make my customize logo and packaging or private label?
2A: Yes, please contact CONFIDENCE AUTOMOTIVE for details in need for private logo.

3Q: Can you do design for my ideas or drawing?
3A: Yes, we have professional designers and own factories, supportive factories and packaging factories. All your idea is easy to realize with us, pls be rest assured!

4Q: Do you accept small orders?
4A: Yes, we accept trial order to test your market demand and help you grow to the NO.1 player same as we have done for all other partners in world markets.

5Q: May I get your samples to check the quality first?
5A: Yes, normally sample within 7 days and some samples are free.

6Q: What’s the shipping way?
6A: Re. samples order via FedEx, DHL, TNT express with the most effective and cheap way for you save cost and large quantity normally by sea, or rail.

7Q: I am a new hand, how to make business with you?
7A: We help you from the products, price, source, design, inspection, delivery, shipment, customs clearance, and door to door in need. Or any business way with us, we are open mind, welcome to discuss with us. CONFIDENCE AUTOMOTIVE IS ALWAYS YOUR BEST RELIABLE PARTNER IN CHINA.

WHY choose us?

1, Supply Chain: Import high quality raw material incl German BAYER, Japan Mitsubishi, Vietnam biggest rubber factory, etc ensure all production process is reliable and uniform.

2, ODM Design System: We are 1 main car spare parts manufacturer, brand that produce & develop O.E, O.E.M wiper blade, wiper arm, LED Headlight, car horn,  safety flashlight, outdoor flashlight, and packagings and working with world top brands in main markets with the capability to realize all your ideas from drafts, drawings, pictures, samples,… to the BEST OE quality without any doubt, TS16949 qualified.

3, Professional Service: Rich experience with top players in the markets over 10 years with a big service team support ONE-TO-ONE, FACE-TO-FACE business negotiation, communication, consulting, information sharing, and aftersales service help you save cost MAKE EASY business.

4, One-stop Products: Own independent and cooperative factories DIRECT supply! All car parts, accessories or related ones is welcomed openly and we commit to support our partners with ONE-STOP parts, accessories business in China help save purchasing cost, transportation cost, storage charge and time cost for ONE FAST CHEAP SHIPMENT timely!

5, Inspection System: All orders with 1 record system from 1st samples to finally confirmed products, photos, productions before shipment, customers can EASY TO TRACK EVERY ORDER and get 100% assured satisfied goods!

6, Business Growth: We have seasonal market info, new hot products advice, exhibition news to share freely for NEW BUSINESS, OR HELP SALES INCREASE regularly.

Please contact us directly below without hesitate, your inquiry will be answered promptly.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Warranty: One Year
Application: Lorry, Truck, Car, Mini Car, Microbus
Certification: ISO, GS, CB, ETL, SASO, CE, RoHS
Color: Black+Yellow, Can Be Customized
Voltage: 12V
Power Supply: Ignitor
Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

Are there special considerations for air compressor installations in remote areas?

Yes, there are several special considerations to take into account when installing air compressors in remote areas. These areas often lack access to infrastructure and services readily available in urban or well-developed regions. Here are some key considerations:

1. Power Source:

Remote areas may have limited or unreliable access to electricity. It is crucial to assess the availability and reliability of the power source for operating the air compressor. In some cases, alternative power sources such as diesel generators or solar panels may need to be considered to ensure a consistent and uninterrupted power supply.

2. Environmental Conditions:

Remote areas can present harsh environmental conditions that can impact the performance and durability of air compressors. Extreme temperatures, high humidity, dust, and corrosive environments may require the selection of air compressors specifically designed to withstand these conditions. Adequate protection, insulation, and ventilation must be considered to prevent damage and ensure optimal operation.

3. Accessibility and Transport:

Transporting air compressors to remote areas may pose logistical challenges. The size, weight, and portability of the equipment should be evaluated to ensure it can be transported efficiently to the installation site. Additionally, the availability of suitable transportation infrastructure, such as roads or air transportation, needs to be considered to facilitate the delivery and installation process.

4. Maintenance and Service:

In remote areas, access to maintenance and service providers may be limited. It is important to consider the availability of trained technicians and spare parts for the specific air compressor model. Adequate planning for routine maintenance, repairs, and troubleshooting should be in place to minimize downtime and ensure the longevity of the equipment.

5. Fuel and Lubricants:

For air compressors that require fuel or lubricants, ensuring a consistent and reliable supply can be challenging in remote areas. It is necessary to assess the availability and accessibility of fuel or lubricant sources and plan for their storage and replenishment. In some cases, alternative or renewable fuel options may need to be considered.

6. Noise and Environmental Impact:

Remote areas are often characterized by their natural beauty and tranquility. Minimizing noise levels and environmental impact should be a consideration when installing air compressors. Selecting models with low noise emissions and implementing appropriate noise reduction measures can help mitigate disturbances to the surrounding environment and wildlife.

7. Communication and Remote Monitoring:

Given the remote location, establishing reliable communication channels and remote monitoring capabilities can be essential for effective operation and maintenance. Remote monitoring systems can provide real-time data on the performance and status of the air compressor, enabling proactive maintenance and troubleshooting.

By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

air compressor

How are air compressors used in refrigeration and HVAC systems?

Air compressors play a vital role in refrigeration and HVAC (Heating, Ventilation, and Air Conditioning) systems, providing the necessary compression of refrigerant gases and facilitating the heat transfer process. Here are the key ways in which air compressors are used in refrigeration and HVAC systems:

1. Refrigerant Compression:

In refrigeration systems, air compressors are used to compress the refrigerant gas, raising its pressure and temperature. This compressed gas then moves through the system, where it undergoes phase changes and heat exchange to enable cooling or heating. The compressor is the heart of the refrigeration cycle, as it pressurizes and circulates the refrigerant.

2. Refrigeration Cycle:

The compression of refrigerant gas by the air compressor is an essential step in the refrigeration cycle. After compression, the high-pressure, high-temperature gas flows to the condenser, where it releases heat and condenses into a liquid. The liquid refrigerant then passes through an expansion valve or device, which reduces its pressure and temperature. This low-pressure, low-temperature refrigerant then enters the evaporator, absorbing heat from the surrounding environment and evaporating back into a gas. The cycle continues as the gas returns to the compressor for re-compression.

3. HVAC Cooling and Heating:

In HVAC systems, air compressors are used to facilitate cooling and heating processes. The compressor compresses the refrigerant gas, which allows it to absorb heat from the indoor environment in the cooling mode. The compressed gas releases heat in the outdoor condenser unit and then circulates back to the compressor to repeat the cycle. In the heating mode, the compressor reverses the refrigeration cycle, absorbing heat from the outdoor air or ground source and transferring it indoors.

4. Air Conditioning:

Air compressors are an integral part of air conditioning systems, which are a subset of HVAC systems. Compressed refrigerant gases are used to cool and dehumidify the air in residential, commercial, and industrial buildings. The compressor pressurizes the refrigerant, initiating the cooling cycle that removes heat from the indoor air and releases it outside.

5. Compressor Types:

Refrigeration and HVAC systems utilize different types of air compressors. Reciprocating compressors, rotary screw compressors, and scroll compressors are commonly used in these applications. The selection of the compressor type depends on factors such as system size, capacity requirements, efficiency, and application-specific considerations.

6. Energy Efficiency:

Efficient operation of air compressors is crucial for refrigeration and HVAC systems. Energy-efficient compressors help minimize power consumption and reduce operating costs. Additionally, proper compressor sizing and system design contribute to the overall energy efficiency of refrigeration and HVAC systems.

By effectively compressing refrigerant gases and facilitating the heat transfer process, air compressors enable the cooling and heating functions in refrigeration and HVAC systems, ensuring comfortable indoor environments and efficient temperature control.

air compressor

What is the difference between a piston and rotary screw compressor?

Piston compressors and rotary screw compressors are two common types of air compressors with distinct differences in their design and operation. Here’s a detailed explanation of the differences between these two compressor types:

1. Operating Principle:

  • Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
  • Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.

2. Compression Method:

  • Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
  • Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.

3. Efficiency:

  • Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
  • Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.

4. Noise Level:

  • Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
  • Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.

5. Maintenance:

  • Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
  • Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.

6. Size and Portability:

  • Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
  • Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.

These are some of the key differences between piston compressors and rotary screw compressors. The choice between the two depends on factors such as required flow rate, pressure, duty cycle, efficiency, noise level, maintenance needs, and specific application requirements.

China Standard Tire Inflator Heavy Duty Double Cylinders W/Portable Bag/Toolbox,Metal 12V Air Compressor Pump 150psi W/Multi Adapter for Car,Truck,SUV Tire,Dinghy,Air Bed etc.   12v air compressorChina Standard Tire Inflator Heavy Duty Double Cylinders W/Portable Bag/Toolbox,Metal 12V Air Compressor Pump 150psi W/Multi Adapter for Car,Truck,SUV Tire,Dinghy,Air Bed etc.   12v air compressor
editor by CX 2024-02-11

China Hot selling Medical Oil Free Air Pump Oxygen Concentrator Compressor for Oxygenerator 220V 110V air compressor for sale

Product Description

Product Paramenter

ITEM NO

GLE550A-1

Name

Air compressor

Packing

2 Layers Carton Box + Wooden Pallet

Weight

10.4 kg

Dimension

240*113*200 mm

Installation size 

89*203 mm (4*M6)

 

 

 

Technical Specification

Voltage : 220V 50Hz
Power: <=550W;
Restart pressure : 0 bar ;
capacitor : 18uF ;
Speed: 1440rpm;
Noise : ≤58dB(A) ;
Temperature : -5ºC-40ºC ;
Thermal protector : 135ºC  ;
Insulation class: B

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Warranty: Two Years
Lubrication Style: Oil-free
Cooling System: Air Cooling
Cylinder Arrangement: Duplex Arrangement
Cylinder Position: Two Air Compressor
Structure Type: Semi-Closed Type
Samples:
US$ 40/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

Can air compressors be used for painting and sandblasting?

Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:

Painting:

Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:

  • Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
  • Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
  • Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.

Sandblasting:

Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:

  • Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
  • Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
  • Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.

When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.

Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.

air compressor

How are air compressors used in refrigeration and HVAC systems?

Air compressors play a vital role in refrigeration and HVAC (Heating, Ventilation, and Air Conditioning) systems, providing the necessary compression of refrigerant gases and facilitating the heat transfer process. Here are the key ways in which air compressors are used in refrigeration and HVAC systems:

1. Refrigerant Compression:

In refrigeration systems, air compressors are used to compress the refrigerant gas, raising its pressure and temperature. This compressed gas then moves through the system, where it undergoes phase changes and heat exchange to enable cooling or heating. The compressor is the heart of the refrigeration cycle, as it pressurizes and circulates the refrigerant.

2. Refrigeration Cycle:

The compression of refrigerant gas by the air compressor is an essential step in the refrigeration cycle. After compression, the high-pressure, high-temperature gas flows to the condenser, where it releases heat and condenses into a liquid. The liquid refrigerant then passes through an expansion valve or device, which reduces its pressure and temperature. This low-pressure, low-temperature refrigerant then enters the evaporator, absorbing heat from the surrounding environment and evaporating back into a gas. The cycle continues as the gas returns to the compressor for re-compression.

3. HVAC Cooling and Heating:

In HVAC systems, air compressors are used to facilitate cooling and heating processes. The compressor compresses the refrigerant gas, which allows it to absorb heat from the indoor environment in the cooling mode. The compressed gas releases heat in the outdoor condenser unit and then circulates back to the compressor to repeat the cycle. In the heating mode, the compressor reverses the refrigeration cycle, absorbing heat from the outdoor air or ground source and transferring it indoors.

4. Air Conditioning:

Air compressors are an integral part of air conditioning systems, which are a subset of HVAC systems. Compressed refrigerant gases are used to cool and dehumidify the air in residential, commercial, and industrial buildings. The compressor pressurizes the refrigerant, initiating the cooling cycle that removes heat from the indoor air and releases it outside.

5. Compressor Types:

Refrigeration and HVAC systems utilize different types of air compressors. Reciprocating compressors, rotary screw compressors, and scroll compressors are commonly used in these applications. The selection of the compressor type depends on factors such as system size, capacity requirements, efficiency, and application-specific considerations.

6. Energy Efficiency:

Efficient operation of air compressors is crucial for refrigeration and HVAC systems. Energy-efficient compressors help minimize power consumption and reduce operating costs. Additionally, proper compressor sizing and system design contribute to the overall energy efficiency of refrigeration and HVAC systems.

By effectively compressing refrigerant gases and facilitating the heat transfer process, air compressors enable the cooling and heating functions in refrigeration and HVAC systems, ensuring comfortable indoor environments and efficient temperature control.

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.

2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.

3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.

4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.

5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.

6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.

Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.

China Hot selling Medical Oil Free Air Pump Oxygen Concentrator Compressor for Oxygenerator 220V 110V   air compressor for saleChina Hot selling Medical Oil Free Air Pump Oxygen Concentrator Compressor for Oxygenerator 220V 110V   air compressor for sale
editor by CX 2024-01-17

China factory 5.5HP 4kw 200L Auto Shop Pump Air Compressor air compressor repair near me

Product Description

Air Compressor
Stock in Africa,UAE,Singapore

Model HP KW Speed
(RPM)
Capacity
(L/min)
Max Pressure
(Bar)
Tank
(L)
Package
(L*W*H mm)
Weight
(KG)
LSI2080/200 5.5 4 1000 480 10 200 1300*500*960 175
  1. SAVE 15% FREICHT COST
     
    Completely new compact design saved approximately 15% package size, and significantly reduce freight. Honeycomb box package to nicely protect machine and save space.
     
  2. HIGH SAFETY VESSEL
     
    Modern and advanced automatic electrical production line promise excellent quality.
     
    Imported LINCOLN welding machine guarantees the smooth welding without undercut.
     
    Weekly hydrostatic burst test uses 5 times design pressure to check steel quality and welding safety.
     
    The pressure vessel is separately equipped with CE certificates from certification authority-TuV.
     
  3. GOOD QUALITY MOTOR
     
    10%-30% more sheet motor staor and rotor. 15% lower-voltage start-up suitable to many areas. Temperature rises95K to support long time working.
     
  4. FILLING TIME 10% QUICKER THAN COMMON COMPRESSOR
     
    Bold discharge pipe design with inner diameter of 12mm to short the filling time
     
  5. INDUSTRIAL DESIGN PUMP&FULLY-ENCLOSED COVER
     
    Original Italian design of the pump is quite different from the other companies, and of high reorganization.
     
    Fully-enclosed Cover prevent the customers from risks

HangZhou CHINAMFG Machinery Co., Ltd., founded in 2008, is an integrated enterprise specilizing in the design, production, sales, and service of auto maintenance equipment. We not only sell products, but also provide project package services, including project layout design, one-stop purchasing, installation and training, have established cooperative relations with many demestic and foreign customers.

We have operations and experience centers in Africa, the Middle East, and Singapore that provide localized services.

Haosail’s products are passed JINGRUI TEST CENTER’s quality management, which can achieve quality traceability and make customers feel at ease.

Our philosophy: Looking CHINAMFG to the establishment of cooperation with customers, including product sales agent, project contract supporting. Haosail, your auto-repair partner from zero to success.

Q: Why to choose Haosail?

1. Compared to the factory which can only provide single product, we can offer you one-stop purchasing, provide whole set of equipment and turnkey solution for your garage.  
 
2. Compared to normal trading company, we have abroad sales stores and professional after-sale team. You don’t need to worry about our company strength, equipment installation and maintenance problems.
 
3. Compared to normal sales company, we have our LOGO on all of our equipment, Uniform color, if you want to start your own business or act as a product agent, we are the best solution for your investment. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Classification: Variable Capacity
Job Classification: Reciprocating
Transmission Power: Dynamoelectric
Cooling Method: Air-cooled
Cylinder Arrangement Mode: Symmetrical Balance
Cylinder Stage: Single Stage
Customization:
Available

|

air compressor

How are air compressors utilized in pharmaceutical manufacturing?

Air compressors play a crucial role in pharmaceutical manufacturing, where they are utilized for various critical applications. The pharmaceutical industry requires a reliable source of clean and compressed air to ensure the safety, efficiency, and quality of its processes. Here’s an overview of how air compressors are utilized in pharmaceutical manufacturing:

1. Manufacturing Processes:

Air compressors are used in numerous manufacturing processes within the pharmaceutical industry. Compressed air is employed for tasks such as mixing and blending of ingredients, granulation, tablet compression, coating, and encapsulation of pharmaceutical products. The controlled delivery of compressed air facilitates precise and consistent manufacturing processes, ensuring the production of high-quality pharmaceuticals.

2. Instrumentation and Control Systems:

Pharmaceutical manufacturing facilities rely on compressed air for powering instrumentation and control systems. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control temperature and pressure, and automate various processes. The clean and dry nature of compressed air makes it ideal for maintaining the integrity and accuracy of these critical control mechanisms.

3. Packaging and Filling:

Air compressors are employed in pharmaceutical packaging and filling processes. Compressed air is used to power machinery and equipment for bottle cleaning, labeling, capping, and sealing of pharmaceutical products. Compressed air provides the necessary force and precision for efficient and reliable packaging, ensuring product safety and compliance.

4. Cleanroom Environments:

Pharmaceutical manufacturing often takes place in controlled cleanroom environments to prevent contamination and maintain product quality. Air compressors are used to supply clean and filtered compressed air to these cleanrooms, ensuring a controlled and sterile environment for the production of pharmaceuticals. Compressed air is also utilized in cleanroom air showers and air curtains for personnel and material decontamination.

5. Laboratory Applications:

In pharmaceutical laboratories, air compressors are utilized for various applications. Compressed air is used in laboratory instruments, such as gas chromatographs, mass spectrometers, and other analytical equipment. It is also employed in clean air cabinets, fume hoods, and laminar flow benches, providing a controlled and clean environment for testing, analysis, and research.

6. HVAC Systems:

Air compressors are involved in heating, ventilation, and air conditioning (HVAC) systems in pharmaceutical manufacturing facilities. Compressed air powers the operation of HVAC controls, dampers, actuators, and air handling units, ensuring proper air circulation, temperature control, and environmental conditions in various manufacturing areas.

By utilizing air compressors in pharmaceutical manufacturing, the industry can maintain strict quality standards, enhance operational efficiency, and ensure the safety and efficacy of pharmaceutical products.

air compressor

How are air compressors used in refrigeration and HVAC systems?

Air compressors play a vital role in refrigeration and HVAC (Heating, Ventilation, and Air Conditioning) systems, providing the necessary compression of refrigerant gases and facilitating the heat transfer process. Here are the key ways in which air compressors are used in refrigeration and HVAC systems:

1. Refrigerant Compression:

In refrigeration systems, air compressors are used to compress the refrigerant gas, raising its pressure and temperature. This compressed gas then moves through the system, where it undergoes phase changes and heat exchange to enable cooling or heating. The compressor is the heart of the refrigeration cycle, as it pressurizes and circulates the refrigerant.

2. Refrigeration Cycle:

The compression of refrigerant gas by the air compressor is an essential step in the refrigeration cycle. After compression, the high-pressure, high-temperature gas flows to the condenser, where it releases heat and condenses into a liquid. The liquid refrigerant then passes through an expansion valve or device, which reduces its pressure and temperature. This low-pressure, low-temperature refrigerant then enters the evaporator, absorbing heat from the surrounding environment and evaporating back into a gas. The cycle continues as the gas returns to the compressor for re-compression.

3. HVAC Cooling and Heating:

In HVAC systems, air compressors are used to facilitate cooling and heating processes. The compressor compresses the refrigerant gas, which allows it to absorb heat from the indoor environment in the cooling mode. The compressed gas releases heat in the outdoor condenser unit and then circulates back to the compressor to repeat the cycle. In the heating mode, the compressor reverses the refrigeration cycle, absorbing heat from the outdoor air or ground source and transferring it indoors.

4. Air Conditioning:

Air compressors are an integral part of air conditioning systems, which are a subset of HVAC systems. Compressed refrigerant gases are used to cool and dehumidify the air in residential, commercial, and industrial buildings. The compressor pressurizes the refrigerant, initiating the cooling cycle that removes heat from the indoor air and releases it outside.

5. Compressor Types:

Refrigeration and HVAC systems utilize different types of air compressors. Reciprocating compressors, rotary screw compressors, and scroll compressors are commonly used in these applications. The selection of the compressor type depends on factors such as system size, capacity requirements, efficiency, and application-specific considerations.

6. Energy Efficiency:

Efficient operation of air compressors is crucial for refrigeration and HVAC systems. Energy-efficient compressors help minimize power consumption and reduce operating costs. Additionally, proper compressor sizing and system design contribute to the overall energy efficiency of refrigeration and HVAC systems.

By effectively compressing refrigerant gases and facilitating the heat transfer process, air compressors enable the cooling and heating functions in refrigeration and HVAC systems, ensuring comfortable indoor environments and efficient temperature control.

air compressor

How is air pressure measured in air compressors?

Air pressure in air compressors is typically measured using one of two common units: pounds per square inch (PSI) or bar. Here’s a brief explanation of how air pressure is measured in air compressors:

1. Pounds per Square Inch (PSI): PSI is the most widely used unit of pressure measurement in air compressors, especially in North America. It represents the force exerted by one pound of force over an area of one square inch. Air pressure gauges on air compressors often display pressure readings in PSI, allowing users to monitor and adjust the pressure accordingly.

2. Bar: Bar is another unit of pressure commonly used in air compressors, particularly in Europe and many other parts of the world. It is a metric unit of pressure equal to 100,000 pascals (Pa). Air compressors may have pressure gauges that display readings in bar, providing an alternative measurement option for users in those regions.

To measure air pressure in an air compressor, a pressure gauge is typically installed on the compressor’s outlet or receiver tank. The gauge is designed to measure the force exerted by the compressed air and display the reading in the specified unit, such as PSI or bar.

It’s important to note that the air pressure indicated on the gauge represents the pressure at a specific point in the air compressor system, typically at the outlet or tank. The actual pressure experienced at the point of use may vary due to factors such as pressure drop in the air lines or restrictions caused by fittings and tools.

When using an air compressor, it is essential to set the pressure to the appropriate level required for the specific application. Different tools and equipment have different pressure requirements, and exceeding the recommended pressure can lead to damage or unsafe operation. Most air compressors allow users to adjust the pressure output using a pressure regulator or similar control mechanism.

Regular monitoring of the air pressure in an air compressor is crucial to ensure optimal performance, efficiency, and safe operation. By understanding the units of measurement and using pressure gauges appropriately, users can maintain the desired air pressure levels in their air compressor systems.

China factory 5.5HP 4kw 200L Auto Shop Pump Air Compressor   air compressor repair near meChina factory 5.5HP 4kw 200L Auto Shop Pump Air Compressor   air compressor repair near me
editor by CX 2024-01-04

China factory Car Air Compressor for Gx460/470 Air Suspension Pump OEM 48910-60020 wholesaler

Product Description

OE number:

48910-60571

Application:

Gx460/470 

Size Standard
Shock Absorber Type Gas-filled
Warranty 12 months
Package Boxes, Cartons
Delivery time within 7 days after getting your payments
Payments T/T, western union,Alipay
Our advantage Factory directly sale, high quality and competitive price.Professional in the manufacture of air suspension
Other products Air Spring, air suspension shock,Air compressor, air valve,rubber sleeve,metal ring,buffer,plastic,dust cover,

Our Products mainly include air spring, air suspension,air compressor,rubber sleeve and other suspension parts for MercedeS Benz,BMW, Audi,Land Rover, Porsche,VW and so on.According to the clients, we could be warranty from 12 months to 24 months.

Specification:

Service:

1.Quality Warranty: according to the clients’ request, we could guarantee fron 12 month to 24 months.
 
2.Delivery time: within 7 days after getting your payments. Regarding the big orders, it need about 15-30 days. according to our stocck and product task.
 
3.Quick response:  We will reply to our clients within 24 hour and try our best to meet the clients request.
 
4.Good Service: Be Honest Forever.However you buy 1 pcs order or you buy more than 1000 pcs, we will sincerely reply to every client.
 
5.Sample policy: We could send you 1 pcs free rubber sleeve for your test. Regarding air spring and air suepsnion, we could return to your sample cost if you order 100 pcs 1 time in your next orders.

Factory workshop:

Packing and Shipping:

Payments:

Clients Feedback

Company Culture:
Company philosophy: take it from the society and serve the society
Development philosophy: dedicated to air spring technology research, build international top air suspension products
Company spirit: honesty, innovation, harmony and CHINAMFG development

After-sales Service: Free Replacements Within One Year
Warranty: 12 Months
Material: Plastic
Certification: ISO/TS16949, ISO9001
Car Make: Toyota
Position: Front
Samples:
US$ 220/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

How does variable speed drive technology improve air compressor efficiency?

Variable Speed Drive (VSD) technology improves air compressor efficiency by allowing the compressor to adjust its motor speed to match the compressed air demand. This technology offers several benefits that contribute to energy savings and enhanced overall system efficiency. Here’s how VSD technology improves air compressor efficiency:

1. Matching Air Demand:

Air compressors equipped with VSD technology can vary the motor speed to precisely match the required compressed air output. Traditional fixed-speed compressors operate at a constant speed regardless of the actual demand, leading to energy wastage during periods of lower air demand. VSD compressors, on the other hand, ramp up or down the motor speed to deliver the necessary amount of compressed air, ensuring optimal energy utilization.

2. Reduced Unloaded Running Time:

Fixed-speed compressors often run unloaded during periods of low demand, where they continue to consume energy without producing compressed air. VSD technology eliminates or significantly reduces this unloaded running time by adjusting the motor speed to closely follow the air demand. As a result, VSD compressors minimize energy wastage during idle periods, leading to improved efficiency.

3. Soft Starting:

Traditional fixed-speed compressors experience high inrush currents during startup, which can strain the electrical system and cause voltage dips. VSD compressors utilize soft starting capabilities, gradually ramping up the motor speed instead of instantly reaching full speed. This soft starting feature reduces mechanical and electrical stress, ensuring a smooth and controlled startup, and minimizing energy spikes.

4. Energy Savings at Partial Load:

In many applications, compressed air demand varies throughout the day or during different production cycles. VSD compressors excel in such scenarios by operating at lower speeds during periods of lower demand. Since power consumption is proportional to motor speed, running the compressor at reduced speeds significantly reduces energy consumption compared to fixed-speed compressors that operate at a constant speed regardless of the demand.

5. Elimination of On/Off Cycling:

Fixed-speed compressors often use on/off cycling to adjust the compressed air output. This cycling can result in frequent starts and stops, which consume more energy and cause mechanical wear. VSD compressors eliminate the need for on/off cycling by continuously adjusting the motor speed to meet the demand. By operating at a consistent speed within the required range, VSD compressors minimize energy losses associated with frequent cycling.

6. Enhanced System Control:

VSD compressors offer advanced control capabilities, allowing for precise monitoring and adjustment of the compressed air system. These systems can integrate with sensors and control algorithms to maintain optimal system pressure, minimize pressure fluctuations, and prevent excessive energy consumption. The ability to fine-tune the compressor’s output based on real-time demand contributes to improved overall system efficiency.

By utilizing variable speed drive technology, air compressors can achieve significant energy savings, reduce operational costs, and enhance their environmental sustainability by minimizing energy wastage and optimizing efficiency.

air compressor

Can air compressors be integrated into automated systems?

Yes, air compressors can be integrated into automated systems, providing a reliable and versatile source of compressed air for various applications. Here’s a detailed explanation of how air compressors can be integrated into automated systems:

Pneumatic Automation:

Air compressors are commonly used in pneumatic automation systems, where compressed air is utilized to power and control automated machinery and equipment. Pneumatic systems rely on the controlled release of compressed air to generate linear or rotational motion, actuating valves, cylinders, and other pneumatic components. By integrating an air compressor into the system, a continuous supply of compressed air is available to power the automation process.

Control and Regulation:

In automated systems, air compressors are often connected to a control and regulation system to manage the compressed air supply. This system includes components such as pressure regulators, valves, and sensors to monitor and adjust the air pressure, flow, and distribution. The control system ensures that the air compressor operates within the desired parameters and provides the appropriate amount of compressed air to different parts of the automated system as needed.

Sequential Operations:

Integration of air compressors into automated systems enables sequential operations to be carried out efficiently. Compressed air can be used to control the timing and sequencing of different pneumatic components, ensuring that the automated system performs tasks in the desired order and with precise timing. This is particularly useful in manufacturing and assembly processes where precise coordination of pneumatic actuators is required.

Energy Efficiency:

Air compressors can contribute to energy-efficient automation systems. By incorporating energy-saving features such as Variable Speed Drive (VSD) technology, air compressors can adjust their power output according to the demand, reducing energy consumption during periods of low activity. Additionally, efficient control and regulation systems help optimize the use of compressed air, minimizing waste and improving overall energy efficiency.

Monitoring and Diagnostics:

Integration of air compressors into automated systems often includes monitoring and diagnostic capabilities. Sensors and monitoring devices can be installed to collect data on parameters such as air pressure, temperature, and system performance. This information can be used for real-time monitoring, preventive maintenance, and troubleshooting, ensuring the reliable operation of the automated system.

When integrating air compressors into automated systems, it is crucial to consider factors such as the specific requirements of the automation process, the desired air pressure and volume, and the compatibility of the compressor with the control and regulation system. Consulting with experts in automation and compressed air systems can help in designing an efficient and reliable integration.

In summary, air compressors can be seamlessly integrated into automated systems, providing the necessary compressed air to power and control pneumatic components, enabling sequential operations, and contributing to energy-efficient automation processes.

air compressor

What are the key components of an air compressor system?

An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

1. Compressor Pump: The compressor pump is the heart of the air compressor system. It draws in ambient air and compresses it to a higher pressure. The pump can be reciprocating (piston-driven) or rotary (screw, vane, or scroll-driven) based on the compressor type.

2. Electric Motor or Engine: The electric motor or engine is responsible for driving the compressor pump. It provides the power necessary to operate the pump and compress the air. The motor or engine’s size and power rating depend on the compressor’s capacity and intended application.

3. Air Intake: The air intake is the opening or inlet through which ambient air enters the compressor system. It is equipped with filters to remove dust, debris, and contaminants from the incoming air, ensuring clean air supply and protecting the compressor components.

4. Compression Chamber: The compression chamber is where the actual compression of air takes place. In reciprocating compressors, it consists of cylinders, pistons, valves, and connecting rods. In rotary compressors, it comprises intermeshing screws, vanes, or scrolls that compress the air as they rotate.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air. It acts as a buffer, allowing for a steady supply of compressed air during peak demand periods and reducing pressure fluctuations. The tank also helps separate moisture from the compressed air, allowing it to condense and be drained out.

6. Pressure Relief Valve: The pressure relief valve is a safety device that protects the compressor system from over-pressurization. It automatically releases excess pressure if it exceeds a predetermined limit, preventing damage to the system and ensuring safe operation.

7. Pressure Switch: The pressure switch is an electrical component that controls the operation of the compressor motor. It monitors the pressure in the system and automatically starts or stops the motor based on pre-set pressure levels. This helps maintain the desired pressure range in the receiver tank.

8. Regulator: The regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications, ensuring a consistent and safe supply of compressed air.

9. Air Outlet and Distribution System: The air outlet is the point where the compressed air is delivered from the compressor system. It is connected to a distribution system comprising pipes, hoses, fittings, and valves that carry the compressed air to the desired application points or tools.

10. Filters, Dryers, and Lubricators: Depending on the application and air quality requirements, additional components such as filters, dryers, and lubricators may be included in the system. Filters remove contaminants, dryers remove moisture from the compressed air, and lubricators provide lubrication to pneumatic tools and equipment.

These are the key components of an air compressor system. Each component plays a crucial role in the generation, storage, and delivery of compressed air for various industrial, commercial, and personal applications.

China factory Car Air Compressor for Gx460/470 Air Suspension Pump OEM 48910-60020   wholesaler China factory Car Air Compressor for Gx460/470 Air Suspension Pump OEM 48910-60020   wholesaler
editor by CX 2023-12-09

China wholesaler CHINAMFG Premium Portable Air Pump for Car Tires DC12V Car Air Compressor with Hot selling

Product Description

FIXTEC Premium Portable Air Pump for Car Tires DC12V Car Air Compressor 

Main Products

View more products,you can click product keywords…

Main Products
Power Tools Bench Tools Accessories
Hand Tools Air Tools Water Pumps
Welding Machine Generators PPE

Product Description

EBIC Tools is established in 2003, with rich experience in tools business, FIXTEC is our registered brand. One-stop tools station, including full line of power tools, hand tools, bench tools, air tools, welding machine, water pumps, generators, garden tools and power tools accessories etc.

Brand

FIXTEC

Model No.

FCAC12250

Air Pressure ( Max)

260 PSI

Able to inflate

bike tires/car tires/athletic balls

Special Features

 – high pressure 260 psi 

-inflates ave. tires in 6 minutes 

-low power consumption

Continuous Usage time

up to 15 minutes, coninuous

Accessories

2 nozzle adapters and 1 sports needle

12v power cord

3m cord with 10A fuse

Qty/ctn

10pcs

Carton size

49*30*21.5cm

NW./GW.

7.5kg/8.5kg

Recommended products

Customer Evaluation

Company Profile

FAQ

FIXTEC team is based in China to support global marketing and we are looking for local distributors as our long term partners,Welcome to contact us!

After-sales Service: *
Warranty: *
Lubrication Style: Oil-free
Cooling System: Air Cooling
Cylinder Arrangement: Parallel Arrangement
Cylinder Position: Horizontal
Samples:
US$ 7.2/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

What are the advantages of using an air compressor in construction?

Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:

  • Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
  • Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
  • Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
  • Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
  • Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
  • Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
  • Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.

In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.

air compressor

What is the energy efficiency of modern air compressors?

The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:

Variable Speed Drive (VSD) Technology:

Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.

Air Leakage Reduction:

Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.

Efficient Motor Design:

The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.

Optimized Control Systems:

Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.

Air Storage and Distribution:

Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.

Energy Management and Monitoring:

Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.

It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.

Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.

air compressor

What is the impact of tank size on air compressor performance?

The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:

1. Air Storage Capacity: The primary function of the air compressor tank is to store compressed air. A larger tank size allows for greater air storage capacity. This means the compressor can build up a reserve of compressed air, which can be useful for applications that require intermittent or fluctuating air demand. Having a larger tank ensures a steady supply of compressed air during peak usage periods.

2. Run Time: The tank size affects the run time of the air compressor. A larger tank can provide longer continuous operation before the compressor motor needs to restart. This is because the compressed air in the tank can be used to meet the demand without the need for the compressor to run continuously. It reduces the frequency of motor cycling, which can improve energy efficiency and prolong the motor’s lifespan.

3. Pressure Stability: A larger tank helps maintain stable pressure during usage. When the compressor is running, it fills the tank until it reaches a specified pressure level, known as the cut-out pressure. As the air is consumed from the tank, the pressure drops to a certain level, known as the cut-in pressure, at which point the compressor restarts to refill the tank. A larger tank size results in a slower pressure drop during usage, ensuring more consistent and stable pressure for the connected tools or equipment.

4. Duty Cycle: The duty cycle refers to the amount of time an air compressor can operate within a given time period. A larger tank size can increase the duty cycle of the compressor. The compressor can run for longer periods before reaching its duty cycle limit, reducing the risk of overheating and improving overall performance.

5. Tool Compatibility: The tank size can also impact the compatibility with certain tools or equipment. Some tools, such as high-demand pneumatic tools or spray guns, require a continuous and adequate supply of compressed air. A larger tank size ensures that the compressor can meet the air demands of such tools without causing pressure drops or affecting performance.

It is important to note that while a larger tank size offers advantages in terms of air storage and performance, it also results in a larger and heavier compressor unit. Consider the intended application, available space, and portability requirements when selecting an air compressor with the appropriate tank size.

Ultimately, the optimal tank size for an air compressor depends on the specific needs of the user and the intended application. Assess the air requirements, duty cycle, and desired performance to determine the most suitable tank size for your air compressor.

China wholesaler CHINAMFG Premium Portable Air Pump for Car Tires DC12V Car Air Compressor   with Hot sellingChina wholesaler CHINAMFG Premium Portable Air Pump for Car Tires DC12V Car Air Compressor   with Hot selling
editor by CX 2023-11-02

China Standard Emergency Portable Car Pump 12V Digital Air Compressor for Car Auto Pump wholesaler

Product Description

Newly launched 12V Digital touch screen portable wireless car tyre inflator

1 Rated voltage DC 12V
2 Rated power 120W
3 Maximum current 10A
4 Maximum pressure More than 100PSI/4 kilogram
5 Work current ≤10A
6 time for inflating 195/65R15 tires <10minutes 30seconds(for reference)
7 time for inflating 35L tin 0-2.5BAR <14minutes (current<10A)
8 Cycle life 300 hours
9 Put air nozzle or not Put air nozzle
10 Light With light
11 Input Type-C 5V/2A
12 Output USB 5V/2A
13 Tracheal length 230mm (EPDM-Black outer woven rubber hose)
14 Movement specification 1916 movement, 390 motor
15 Product unit weight 0.5kg
16 Start Touch
17 Tire pressure display Digital display
18 Full power 0-8PSI Work over an hour
19 Support mobilephone charging or not Support
20 Battery 18650-7800mAh
 

Product Description

Company Profile

      ZheJiang EDSUN ELECTRICAL SCIENCE AND TECHNOLOGY CO.,LTD, established in 2011 and located in HangZhou CITY,ZheJiang  PROVINCE. EDSUN is a professional company engaged in the manufacture of power supply systems and power supply  device for the power supply engineering , and also focus on research, manufacturing, marketing and after-service of
DC Power Supply ,Power Supply Equipment, Portable ev charger,car jump starter ,portable power station, Home energy storage system ,lifepo4 home energy storage battery ,inverter,solar panel,ups power ,emergency backup power supply,vehicle parts &accessories etc. Along with its rapid development recent years, we have the production workshop and research laboratory around 2000 square meters, 6 cycle production lines and 6 cycle test lines. Our company has registered the trademarks of “EDSUN, DURANT, LECXIHU (WEST LAKE) DIS.CHE”, owned 10 software copyrights, 9 utility model patents and 3 invention patents with highly reputation in domestic and overseas. At the same time, we are dedicated to strict quality control and thoughtful customer service and obtained I S O 9 0 0 1, I S O 4 5 0 0 1, I S O 1 4 0 0 1 , 3 A class and CE certificates. And our company even has established extensive cooperation and further communication with colleges, universities, and research institutions, it has formed a school-enterprise scientific research alliance to achieved great results. Never being satisfied and keep making progress is the core spirit of  EDSUN, and we will still insist on contributing its strength to our country and even for the world in the field of Power Supply, ev charger ,home energy storage.auto parts

 

FAQ

A) How could I get a sample? You will be charged a sample price plus all related shipping costs. Express delivery charge depends on the quantity of the samples.
B)What can you buy from us? Intelligent Control System, Direct Current Power Supply,Power Supply Equipment, Portable Charging Pile, All kinds of Automatic Components,
C)Why should you buy from us not from other suppliers?
we can provide affordable prices, reliable quality, customized service, professional after-service.

D)What services can we provide? MOQ:One sample order is available. Delivery terms:EXW, FOB, CIF. Packing:standard export packing,including instructions and certificate. OEM/ODM is available. Shipment:Express(Fedex, DHL, UPS &TNT)or forwarder Warranty:At least 1 year free repair for quality warranty, and lifetime free online after-service

E)How can we guarantee quality? Strict detection during production. Strict sampling inspection on products before shipment and intact product packaging ensured.

After-sales Service: Yes
Warranty: 6 Months
Voltage: 12V
Samples:
US$ 23/Set
1 Set(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

Can air compressors be used for painting and sandblasting?

Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:

Painting:

Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:

  • Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
  • Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
  • Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.

Sandblasting:

Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:

  • Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
  • Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
  • Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.

When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.

Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.

air compressor

What is the energy efficiency of modern air compressors?

The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:

Variable Speed Drive (VSD) Technology:

Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.

Air Leakage Reduction:

Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.

Efficient Motor Design:

The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.

Optimized Control Systems:

Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.

Air Storage and Distribution:

Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.

Energy Management and Monitoring:

Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.

It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.

Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.

air compressor

What is the impact of tank size on air compressor performance?

The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:

1. Air Storage Capacity: The primary function of the air compressor tank is to store compressed air. A larger tank size allows for greater air storage capacity. This means the compressor can build up a reserve of compressed air, which can be useful for applications that require intermittent or fluctuating air demand. Having a larger tank ensures a steady supply of compressed air during peak usage periods.

2. Run Time: The tank size affects the run time of the air compressor. A larger tank can provide longer continuous operation before the compressor motor needs to restart. This is because the compressed air in the tank can be used to meet the demand without the need for the compressor to run continuously. It reduces the frequency of motor cycling, which can improve energy efficiency and prolong the motor’s lifespan.

3. Pressure Stability: A larger tank helps maintain stable pressure during usage. When the compressor is running, it fills the tank until it reaches a specified pressure level, known as the cut-out pressure. As the air is consumed from the tank, the pressure drops to a certain level, known as the cut-in pressure, at which point the compressor restarts to refill the tank. A larger tank size results in a slower pressure drop during usage, ensuring more consistent and stable pressure for the connected tools or equipment.

4. Duty Cycle: The duty cycle refers to the amount of time an air compressor can operate within a given time period. A larger tank size can increase the duty cycle of the compressor. The compressor can run for longer periods before reaching its duty cycle limit, reducing the risk of overheating and improving overall performance.

5. Tool Compatibility: The tank size can also impact the compatibility with certain tools or equipment. Some tools, such as high-demand pneumatic tools or spray guns, require a continuous and adequate supply of compressed air. A larger tank size ensures that the compressor can meet the air demands of such tools without causing pressure drops or affecting performance.

It is important to note that while a larger tank size offers advantages in terms of air storage and performance, it also results in a larger and heavier compressor unit. Consider the intended application, available space, and portability requirements when selecting an air compressor with the appropriate tank size.

Ultimately, the optimal tank size for an air compressor depends on the specific needs of the user and the intended application. Assess the air requirements, duty cycle, and desired performance to determine the most suitable tank size for your air compressor.

China Standard Emergency Portable Car Pump 12V Digital Air Compressor for Car Auto Pump   wholesaler China Standard Emergency Portable Car Pump 12V Digital Air Compressor for Car Auto Pump   wholesaler
editor by CX 2023-10-31

China manufacturer Portable Air Compressor Tyre Pump Digital Tire Inflator Multifunction Air Pump Portable Wireless Power HD Touch Screen Fully Automatic Inflation with Light air compressor lowes

Product Description

Product Description

Portable Air Compressor Tyre Pump Digital Tire Inflator Multifunction Air Pump Portable Wireless Power HD Touch Screen Fully Automatic Inflation With Light CACCES E002MAP

1, HD Digital LED TOUCH SCREEN, FULLY Automatic inflation, Easy ONE-HAND Operation

2, CACCES Original Supply, BEST NEW SELLER

3, FAST INFLATION 150 PSI, 3*VALVE for cars, motorcycles, bikes, balls etc ALL FIT.

4, With bright LED light, CONVENIENT in night time.

 

About this item:
 

  • (Mini Design & Multi-function) The cordless tyre inflator can inflate quicker than a full size wired version. The small size and light weight design which is easy to store and carry in a bag. The pump has settings for each application apart from tyres, from blowing up basketballs to a large inflatables (comes complete with valve adapters).

 

  • (Fast Inflation & Super Capacity) The maximum inflating pressure is 150PSI. It takes only 2-4 minutes to inflate a tire. The cordless tire inflator has powerful built-in 4000mAh (2000mAh*2) rechargeable battery which can inflate 4 car tires after being fully charged. Using a Type-C charging lead, it takes about less than 4 hours to fully charge the battery. There are 5 modes of air pressure to adjust the operation interface to ensure the safe use.

 

  • (Memory Function & Built-in LED Light) Our car air pump can remember your latest set of target tire pressure and will display the last used pressure value at your next time use to save your time. The built-in LED light can not only illuminate your inflated tires, but can also be used as an emergency flashlight. There are 3 modes of the lighting. You can choose the state of the emergency light according to your needs to reduce the occurrence of accidents.

 

  • (Touch Digital Display& Flexible Air Hose) Equipped with a clear LED touch display at the top of the portable air compressor, with + and – buttons that will help you to calculate the required values and preset the desired pressure. By briefly pressing the “GEAR Button “, the unit of measurement can be changed between Bar and PSI. Our tubeless car pump has an air pipe that is easily released and replaced after use and very cleverly doubles as a carrying handle when clipped back into place.

 

  • (Automatic Shut Off, Preset and Monitor Tire Pressure) The inflation of our tyre inflator will be stopped when the required pressure is reached. It is easy to set the target pressure and just leave it to do the job. In addition, you can also measure the tire pressure, preselected pressure. It makes tires easier and more convenient to inflate in an emergency. Designed with a large air vent at the bottom, which provides good heat dissipation so that it can work continuously and never get hot.

Detailed Photos

 

 

Product Parameters

Product Name Portable Air Compressor Tyre Pump Digital Tire Inflator Multifunction Air Pump Portable Wireless Power HD Touch Screen Fully Automatic Inflation With Light 
CACCES E002MAP
Product No. E002MAP
Color Black, or ANY in demand (color MOQ 10,000 pcs)
Material ABS + Copper
Working current Instantaneous current 3A, about 1.5A after stabilization 
Battery 4000mA
Speed 20000 revolutions per minute 
Noize 70-80DB
Charging voltage ≥5V2A 
Max Output Power 30W
Maximum pressure 150 PSI
Length of power cord 3M 
Length of Air Horse  21.65 inch(55 cm)
Air Flow 35L / Min
Working time about 30 Min
Charging time 3-4 hours 
Product Dim. 80*80*132mm 
Packing Dim. 84*84*200mm 
Product N.W 395g/pc
Packing G.W 555g/pc
Packing QTY 20 sets
Carton Dim. 46*37*22cm 
Cartton G.W 13.2kg 
Customized logo  Yes, OEM MOQ 1000 pcs
Usage Car, motorcycle, bike, ball etc
Accessories Incl.

3 Nozzle Adaptors, 1* Air Flow Pipe, 1*USB charging cable, 1* User Manual

Certification FCC/ROHS/CE/UN38.3/MSDS

About This Item:

  • (Fast Inflation): The max inflatable pressure is 150 psi. The tyre pump can inflate a standard mid-size car tire in 3-5 mins from 0 to 35 psi. Note: After a continuous use of the machine for more than 10 minutes, the machine needs to be stopped and reused after 15 minutes.
  • (Auto Shut Off): The portable air compressor has the feature of automatic shut off. You can preset the pressure value. When the preset tire pressure is reached, the digital air pump will automatically shut off. There is no need to worry about over inflating or low tire pressure.
  • (Touch Screen Display & LED Lighting): This car tyre pump is equipped with a precise and bright display, which allows you to set the tyre pressure accurately in 4 unit values (psi, bar, kPa, kg/cm²). And the LED lights can be easily used even in the dark. For example, inflating the tyre, repairing your car and so on.
  • (Multiple Uses): The car air inflator with a 2.8m cable can reach 4 tires easily. It is suitable to inflate car, bike, motor, ball, air cushion, compact or midsize sedan SUV, etc. Note: The tyre pump can’t be used for large or super heavy car or trucks, such as Bus, Big truck, Van, Campervan, Minivan etc.
  • (Safe & Easy Operation): The tyre inflator is very safe and easy to operate. Just start the car engine, plug the power connector into a cigarette lighter and connect the inflatable line to the tire you wish to inflate. Preset the unit value and pressure and then start switch. It will automatically shut off once CHINAMFG at the preset pressure.

 

FAQ

1Q: When can I get the quotation?
1A: CONFIDENCE AUTOMOTIVE usually quotes you within 6 hours after we get your inquiry.

2Q: Can I make my customize logo and packaging or private label?
2A: Yes, please contact CONFIDENCE AUTOMOTIVE for details in need for private logo.

3Q: Can you do design for my ideas or drawing?
3A: Yes, we have professional designers and own factories, supportive factories and packaging factories. All your idea is easy to realize with us, pls be rest assured!

4Q: Do you accept small orders?
4A: Yes, we accept trial order to test your market demand and help you grow to the NO.1 player same as we have done for all other partners in world markets.

5Q: May I get your samples to check the quality first?
5A: Yes, normally sample within 7 days and some samples are free.

6Q: What’s the shipping way?
6A: Re. samples order via FedEx, DHL, TNT express with the most effective and cheap way for you save cost and large quantity normally by sea, or rail.

7Q: I am a new hand, how to make business with you?
7A: We help you from the products, price, source, design, inspection, delivery, shipment, customs clearance, and door to door in need. Or any business way with us, we are open mind, welcome to discuss with us. CONFIDENCE AUTOMOTIVE IS ALWAYS YOUR BEST RELIABLE PARTNER IN CHINA.

WHY choose us?

1, Supply Chain: Import high quality raw material incl German BAYER, Japan Mitsubishi, Vietnam biggest rubber factory, etc ensure all production process is reliable and uniform.

2, ODM Design System: We are 1 main car spare parts manufacturer, brand that produce & develop O.E, O.E.M wiper blade, wiper arm, LED Headlight, car horn,  car multifunction hammer flashlight, outdoor radio, and packagings that working with world top brands in main markets with the capability to realize all your ideas from drafts, drawings, pictures, samples,… to the BEST OE quality without any doubt, TS16949 qualified.

3, Professional Service: Rich experience with top players in the markets over 10 years with a big service team support ONE-TO-ONE, FACE-TO-FACE business negotiation, communication, consulting, information sharing, and aftersales service help you save cost MAKE EASY business.

4, One-stop Products: Own independent and cooperative factories DIRECT supply! All car parts, accessories or related ones is welcomed openly and we commit to support our partners with ONE-STOP parts, accessories business in China help save purchasing cost, transportation cost, storage charge and time cost for ONE FAST CHEAP SHIPMENT timely!

5, Inspection System: All orders with 1 record system from 1st samples to finally confirmed products, photos, productions before shipment, customers can EASY TO TRACK EVERY ORDER and get 100% assured satisfied goods!

6, Business Growth: We have seasonal market info, new hot products advice, exhibition news to share freely for NEW BUSINESS, OR HELP SALES INCREASE regularly.

Please contact us directly below without hesitate, your inquiry will be answered promptly.

 

Application: Lorry, Truck, Car, Mini Car, Microbus
Certification: ISO, GS, CB, ETL, SASO, CE, RoHS
Color: Black
Voltage: 12V
Power Supply: Battery
Power: 120W
Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

How are air compressors employed in the petrochemical industry?

Air compressors play a vital role in the petrochemical industry, where they are employed for various applications that require compressed air. The petrochemical industry encompasses the production of chemicals and products derived from petroleum and natural gas. Here’s an overview of how air compressors are utilized in the petrochemical industry:

1. Instrumentation and Control Systems:

Air compressors are used to power pneumatic instrumentation and control systems in petrochemical plants. These systems rely on compressed air to operate control valves, actuators, and other pneumatic devices that regulate processes such as flow control, pressure control, and temperature control. Compressed air provides a reliable and clean source of energy for these critical control mechanisms.

2. Pneumatic Tools and Equipment:

Petrochemical plants often utilize pneumatic tools and equipment for various tasks such as maintenance, repair, and construction activities. Air compressors supply the necessary compressed air to power these tools, including pneumatic drills, impact wrenches, grinders, sanders, and painting equipment. The versatility and convenience of compressed air make it an ideal energy source for a wide range of pneumatic tools used in the industry.

3. Process Air and Gas Supply:

Petrochemical processes often require a supply of compressed air and gases for specific applications. Air compressors are employed to generate compressed air for processes such as oxidation, combustion, and aeration. They may also be used to compress gases like nitrogen, hydrogen, and oxygen, which are utilized in various petrochemical reactions and treatment processes.

4. Cooling and Ventilation:

Petrochemical plants require adequate cooling and ventilation systems to maintain optimal operating conditions and ensure the safety of personnel. Air compressors are used to power cooling fans, blowers, and air circulation systems that help maintain the desired temperature, remove heat generated by equipment, and provide ventilation in critical areas.

5. Nitrogen Generation:

Nitrogen is widely used in the petrochemical industry for applications such as blanketing, purging, and inerting. Air compressors are utilized in nitrogen generation systems, where they compress atmospheric air, which is then passed through a nitrogen separation process to produce high-purity nitrogen gas. This nitrogen is used for various purposes, including preventing the formation of explosive mixtures, protecting sensitive equipment, and maintaining the integrity of stored products.

6. Instrument Air:

Instrument air is essential for operating pneumatic instruments, analyzers, and control devices throughout the petrochemical plant. Air compressors supply compressed air that is treated and conditioned to meet the stringent requirements of instrument air quality standards. Instrument air is used for tasks such as pneumatic conveying, pneumatic actuators, and calibration of instruments.

By employing air compressors in the petrochemical industry, operators can ensure reliable and efficient operation of pneumatic systems, power various tools and equipment, support critical processes, and maintain safe and controlled environments.

air compressor

What is the role of air compressors in manufacturing and industrial processes?

Air compressors play a crucial role in various manufacturing and industrial processes, providing a reliable source of compressed air that powers a wide range of equipment and tools. Here are some key roles of air compressors in manufacturing and industrial settings:

1. Pneumatic Tools and Equipment:

Air compressors power a wide range of pneumatic tools and equipment used in manufacturing processes. These tools include impact wrenches, air drills, sanders, grinders, nail guns, and spray guns. Compressed air provides the necessary force and energy for these tools, enabling efficient and precise operations.

2. Automation and Control Systems:

Compressed air is used in automation and control systems within manufacturing facilities. Pneumatic actuators and valves use compressed air to control the movement of machinery and components. These systems are widely used in assembly lines, packaging operations, and material handling processes.

3. Air Blowing and Cleaning:

Compressed air is employed for blowing and cleaning applications in manufacturing and industrial processes. Air blowguns and air nozzles are used to remove debris, dust, and contaminants from surfaces, machinery, and products. Compressed air is also used for drying, cooling, and purging operations.

4. Air Separation and Gas Generation:

Air compressors are used in air separation plants to generate industrial gases such as nitrogen, oxygen, and argon. These gases are essential for various industrial processes, including metal fabrication, chemical production, and food packaging.

5. HVAC Systems:

Compressed air is utilized in heating, ventilation, and air conditioning (HVAC) systems. It powers pneumatic actuators for damper control, pneumatic controls for pressure regulation, and pneumatic valves for flow control in HVAC applications.

6. Air Compression for Storage and Transport:

Compressed air is used for storage and transport purposes in manufacturing and industrial settings. It is often used to pressurize storage tanks or containers that hold gases or liquids. Compressed air also facilitates the transfer of materials through pipelines and pneumatic conveying systems.

7. Process Instrumentation:

Compressed air is utilized in process instrumentation and control systems. It powers pneumatic instruments such as pressure gauges, flow meters, and control valves. These instruments play a critical role in monitoring and regulating various parameters in industrial processes.

8. Material Handling and Pneumatic Conveying:

In manufacturing and industrial facilities, compressed air is used for material handling and pneumatic conveying systems. It enables the movement of bulk materials such as powders, granules, and pellets through pipelines, facilitating efficient and controlled material transfer.

Overall, air compressors are vital components in manufacturing and industrial processes, providing a versatile and efficient source of power for a wide range of applications. The specific role of air compressors may vary depending on the industry, process requirements, and operational needs.

air compressor

What is the impact of tank size on air compressor performance?

The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:

1. Air Storage Capacity: The primary function of the air compressor tank is to store compressed air. A larger tank size allows for greater air storage capacity. This means the compressor can build up a reserve of compressed air, which can be useful for applications that require intermittent or fluctuating air demand. Having a larger tank ensures a steady supply of compressed air during peak usage periods.

2. Run Time: The tank size affects the run time of the air compressor. A larger tank can provide longer continuous operation before the compressor motor needs to restart. This is because the compressed air in the tank can be used to meet the demand without the need for the compressor to run continuously. It reduces the frequency of motor cycling, which can improve energy efficiency and prolong the motor’s lifespan.

3. Pressure Stability: A larger tank helps maintain stable pressure during usage. When the compressor is running, it fills the tank until it reaches a specified pressure level, known as the cut-out pressure. As the air is consumed from the tank, the pressure drops to a certain level, known as the cut-in pressure, at which point the compressor restarts to refill the tank. A larger tank size results in a slower pressure drop during usage, ensuring more consistent and stable pressure for the connected tools or equipment.

4. Duty Cycle: The duty cycle refers to the amount of time an air compressor can operate within a given time period. A larger tank size can increase the duty cycle of the compressor. The compressor can run for longer periods before reaching its duty cycle limit, reducing the risk of overheating and improving overall performance.

5. Tool Compatibility: The tank size can also impact the compatibility with certain tools or equipment. Some tools, such as high-demand pneumatic tools or spray guns, require a continuous and adequate supply of compressed air. A larger tank size ensures that the compressor can meet the air demands of such tools without causing pressure drops or affecting performance.

It is important to note that while a larger tank size offers advantages in terms of air storage and performance, it also results in a larger and heavier compressor unit. Consider the intended application, available space, and portability requirements when selecting an air compressor with the appropriate tank size.

Ultimately, the optimal tank size for an air compressor depends on the specific needs of the user and the intended application. Assess the air requirements, duty cycle, and desired performance to determine the most suitable tank size for your air compressor.

China manufacturer Portable Air Compressor Tyre Pump Digital Tire Inflator Multifunction Air Pump Portable Wireless Power HD Touch Screen Fully Automatic Inflation with Light   air compressor lowesChina manufacturer Portable Air Compressor Tyre Pump Digital Tire Inflator Multifunction Air Pump Portable Wireless Power HD Touch Screen Fully Automatic Inflation with Light   air compressor lowes
editor by CX 2023-10-27

China Professional CHINAMFG CHINAMFG A7 Engine Parts Heavy Truck Spare Parts Air Pump Air Compressor Vg1246130008 air compressor for sale

Product Description

Product Description

Sinotruk CHINAMFG A7 Engine Parts  Heavy Truck Spare Parts air pump Air Compressor Vg1246130008

Weichai Spare Parts Air Compressor 612600130369

Truck spare parts air compressor 612600130408

Howo engine spare parts air compressor 612600130624

trucks engine air compressor 61260013 0571

sinotruck engine air compressor assy. VG157130001

Heavy truck spare parts air pump VG1560130080A

 

Packaging & Shipping

Product Show

Our products include : Cabin spare parts, Engine spare parts, Gearbox spare parts, Axle spare parts and Electrical spare parts. All parts you need are here.

VGOil filter    VGFine filter element

VG1540 0571 1 Primary filter element    VG260571253 Belt-water pump

VGBelt-generator   WGControl cable

WGCompressor    VG14040065 Cylinder head cover

WGFan cover    VG156571571 Camshaft bush

WGFRONT RIGHT MUDGUARD                             
WGFRONT WHEEL FENDER REAR PART LEFT WITH COLOR

WGFRONT WHEEL FENDER REAR PART RIGHT WITH COLOR

WGLEFT WHEEL FENDER WITH COLOR

WGRIGHT WHEEL FENDER WITH COLOR

WGSTEP RIGHT                                          WGSTEP LEFT

WGSHOCK ABSORBER                              AZSTABILIZER

WGRUBBER STOP(STEEPLE-HEAD)          WGWASHER

WGBUSH                                                       WGBUSH

WGABOVE BRACKET LEFT                         WGABOVE BRACKET RIGHT

WGSENSOR FOR CAB LOCK                      WGT-NOZZLE

WGHOSE                                                       WGHYDRAULIC LOCK

WGSHOCK ABSORBER

Cabin parts:

Bumper

Panel

Fender

Front Cover

Side Wing

Head Light

Rear View Mirror

Sun Shade

Hydraulic Lock

Wiper

Shock Absorber

Fog Lamp

WG162111011 Face Cover         WGBumper

AZSun Visor            WG1642777571/20 Rear View Mirror

AZShock Absorber   WGDoor Handle

WGHydraulic Lock   WG9719720001/2 Head Lamp

WG9719720005/6 Fog Lamp        WG9719810001/2 Rear Tail Lamp

Chassis parts Brake Chamber Assembly
Transmission parts Fast Gearbox, Transmission Shaft, Drive Shaft
Engine parts Turbocharger, Piston, etc
Cab parts Shock Absorber, 

 

Company Profile

HangZhou Xihu (West Lake) Dis. Trading Co., Ltd. is a heavy duty truck and spare parts supplier in China. we mainly deals with spare parts, trucks and construction machinery. Since the company was built, we pay attention to maintaining and developing the long-term cooperation relationship with the customers. 

Our company covers an area of 10,000 square meters,including 2,000 square CHINAMFG business operation, 3,200 square CHINAMFG for maintenance and 2,000 square CHINAMFG truck parts warehouse. With a professional team nearly 100 workers with strong sales and maintenance abilities export products to more than 50 countries all over the world, such as Vietnam, Malaysia, Philippine, Thailand, Indonesia, Fiji, Nigeria, Algeria, Egypt, Tanzania, Ethiopia, Kenya, Mali, Congo, Sudan, Cameroon, Iran, Pakistan, Kazakhstan, Peru etc.

We can provide full range of genuine spare parts with best price. For other brands, we have very good relationship with the manufacturers, which can make sure that we are able to provide the spare parts quickly and accurately. The spare parts is now being exported to Russia, Middle East, Africa, South America, Asia countries, etc. we will provide the best service and products, to satisfy the demands of our customers. Sticking to the principle of ” all for our customers”, we warmly welcome friends all over the world to visit and establish business relationship with us.

Our Advantages

1. After getting your order, we will take pictures of every parts for you. Even if you have 500 items.

2. With CHINAMFG parts system,we can get the exact information according the chassis no and assembly nameplate , accurate rate reaches 99%.

3. Our boss is very familiar with the working principle and maintenance of trucks. You are welcome to communicate with us.

FAQ

Q1: What is your payment terms?

A: We accept T/T, WESTERN UNION, PAYPAL, T/T 30% as deposit, 70% before Delivery.

 

Q2: What is the packing?

A: Carton or wooden case, if you want to put your logo on the packing, we will do it after get your authorization letter.

 

Q3: When can you deliver products after payment?

A: By Express, Usually take 1-3 days; By Air, usually take 2-3 days; By Sea, usually take 5-15 days.

 

Q4: What can you do to complete order perfectly?

A: In the beginning, we will communicate with clients in detail to understand what they need. Before packing, we will check the products and send photos to clients. After confirmation, we will packing products well to avoid damage.

Once we get tracking number, we will offer it to clients and keep contact with clients.

 

Q5: Can you offer sample?

A: Yes , we can offer sample, for small value products, only need to pay shipping cost.

For High value products, you need to pay for it with freight.

After-sales Service: Online Guidance
Warranty: 3-6 Months
Type: Engine
Certification: ISO9001
Brake System Parts: Brake
Color: Black

air compressor

What are the advantages of using an air compressor in construction?

Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:

  • Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
  • Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
  • Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
  • Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
  • Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
  • Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
  • Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.

In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.

air compressor

What is the energy efficiency of modern air compressors?

The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:

Variable Speed Drive (VSD) Technology:

Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.

Air Leakage Reduction:

Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.

Efficient Motor Design:

The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.

Optimized Control Systems:

Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.

Air Storage and Distribution:

Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.

Energy Management and Monitoring:

Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.

It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.

Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.

air compressor

How is air pressure measured in air compressors?

Air pressure in air compressors is typically measured using one of two common units: pounds per square inch (PSI) or bar. Here’s a brief explanation of how air pressure is measured in air compressors:

1. Pounds per Square Inch (PSI): PSI is the most widely used unit of pressure measurement in air compressors, especially in North America. It represents the force exerted by one pound of force over an area of one square inch. Air pressure gauges on air compressors often display pressure readings in PSI, allowing users to monitor and adjust the pressure accordingly.

2. Bar: Bar is another unit of pressure commonly used in air compressors, particularly in Europe and many other parts of the world. It is a metric unit of pressure equal to 100,000 pascals (Pa). Air compressors may have pressure gauges that display readings in bar, providing an alternative measurement option for users in those regions.

To measure air pressure in an air compressor, a pressure gauge is typically installed on the compressor’s outlet or receiver tank. The gauge is designed to measure the force exerted by the compressed air and display the reading in the specified unit, such as PSI or bar.

It’s important to note that the air pressure indicated on the gauge represents the pressure at a specific point in the air compressor system, typically at the outlet or tank. The actual pressure experienced at the point of use may vary due to factors such as pressure drop in the air lines or restrictions caused by fittings and tools.

When using an air compressor, it is essential to set the pressure to the appropriate level required for the specific application. Different tools and equipment have different pressure requirements, and exceeding the recommended pressure can lead to damage or unsafe operation. Most air compressors allow users to adjust the pressure output using a pressure regulator or similar control mechanism.

Regular monitoring of the air pressure in an air compressor is crucial to ensure optimal performance, efficiency, and safe operation. By understanding the units of measurement and using pressure gauges appropriately, users can maintain the desired air pressure levels in their air compressor systems.

China Professional CHINAMFG CHINAMFG A7 Engine Parts Heavy Truck Spare Parts Air Pump Air Compressor Vg1246130008   air compressor for saleChina Professional CHINAMFG CHINAMFG A7 Engine Parts Heavy Truck Spare Parts Air Pump Air Compressor Vg1246130008   air compressor for sale
editor by CX 2023-10-18